IEE174I 22.53.12 DISPLAY M FRAME 1 F E SYS=ADCD
PROCESSOR STATUS
ID CPU SERIAL
00 + 0123453090
01 + 1123453090
02 + 2123453090
03 + 3123453090
04 -
05 -
06 -
IEE612I CN=L700 DEVNUM=0700 SYS=ADCD
Message appears in Console Terminal
Re: Message appears in Console Terminal
by Robert Sample » Mon Aug 06, 2018 11:35 pm
Cancelling the job will mean MQ series won't be executing. The performance of the system should actually improve a bit without it executing; the only impact would be if you have something attempting to access MQ series since it would not be able to get to it.
- Robert Sample
- Global moderator
- Posts: 3719
- Joined: Sat Dec 19, 2009 8:32 pm
- Location: Dubuque, Iowa, USA
- Has thanked: 1 time
- Been thanked: 279 times
Re: Message appears in Console Terminal
by enrico-sorichetti » Tue Aug 07, 2018 12:22 am
why not ask the people who let You use their mainframe ? 
they know the setup we do not!
they know the setup we do not!
cheers
enrico
When I tell somebody to RTFM or STFW I usually have the page open in another tab/window of my browser,
so that I am sure that the information requested can be reached with a very small effort
enrico
When I tell somebody to RTFM or STFW I usually have the page open in another tab/window of my browser,
so that I am sure that the information requested can be reached with a very small effort
- enrico-sorichetti
- Global moderator
- Posts: 2994
- Joined: Fri Apr 18, 2008 11:25 pm
- Has thanked: 0 time
- Been thanked: 164 times
Re: Message appears in Console Terminal
by rogerb » Tue Aug 07, 2018 12:24 am
Thank you for your answer Mr. Robert Sample.
The MQ series you're talking about is:
MQ WMQ Series Operations and Control
Correct me if I'm wrong, the WMQ Series Operations and Control is used for administration tasks ?
Thank you,
Roger
The MQ series you're talking about is:
MQ WMQ Series Operations and Control
Correct me if I'm wrong, the WMQ Series Operations and Control is used for administration tasks ?
Thank you,
Roger
Re: Message appears in Console Terminal
by Robert Sample » Tue Aug 07, 2018 12:32 am
MQ is middleware, much like CICS. It is a program product, and as such is NOT part of the operating system z/OS (just as CICS is not considered part of z/OS), but rather an independent software that may be purchased and used on a given site (but it is NOT required). The operations and control you are referring to will be used for administrative tasks FOR MQ SERIES ONLY. The operating system administrative tasks are handled separately. Since MQ series is a program product (and hence optional to any site), it is only needed to be running when an application attempts to use components of the product.
- Robert Sample
- Global moderator
- Posts: 3719
- Joined: Sat Dec 19, 2009 8:32 pm
- Location: Dubuque, Iowa, USA
- Has thanked: 1 time
- Been thanked: 279 times
Re: Message appears in Console Terminal
by enrico-sorichetti » Tue Aug 07, 2018 12:45 am
the zOS 1.10 ADCD that the TS is running contains ALL The relevant program products 
cheers
enrico
When I tell somebody to RTFM or STFW I usually have the page open in another tab/window of my browser,
so that I am sure that the information requested can be reached with a very small effort
enrico
When I tell somebody to RTFM or STFW I usually have the page open in another tab/window of my browser,
so that I am sure that the information requested can be reached with a very small effort
- enrico-sorichetti
- Global moderator
- Posts: 2994
- Joined: Fri Apr 18, 2008 11:25 pm
- Has thanked: 0 time
- Been thanked: 164 times
Re: Message appears in Console Terminal
by enrico-sorichetti » Tue Aug 07, 2018 12:56 am
post the virtual mainframe configuration so that we can see if any volumes were left out
cheers
enrico
When I tell somebody to RTFM or STFW I usually have the page open in another tab/window of my browser,
so that I am sure that the information requested can be reached with a very small effort
enrico
When I tell somebody to RTFM or STFW I usually have the page open in another tab/window of my browser,
so that I am sure that the information requested can be reached with a very small effort
- enrico-sorichetti
- Global moderator
- Posts: 2994
- Joined: Fri Apr 18, 2008 11:25 pm
- Has thanked: 0 time
- Been thanked: 164 times
Re: Message appears in Console Terminal
by prino » Tue Aug 07, 2018 11:57 am
enrico-sorichetti wrote:the zOS 1.10 ADCD that the TS is running contains ALL The relevant program products
Now how would you know
Robert AH Prins
robert.ah.prins @ the.17+Gb.Google thingy
robert.ah.prins @ the.17+Gb.Google thingy
-
prino - Posts: 635
- Joined: Wed Mar 11, 2009 12:22 am
- Location: Vilnius, Lithuania
- Has thanked: 3 times
- Been thanked: 28 times
Re: Message appears in Console Terminal
by willy jensen » Tue Aug 07, 2018 1:35 pm
You say that this message has started to appear recently. So what changed? Seems that a device which used to be available is now offline. I suggest that you check the configuraton, and messages from the emulator when started. If possible then compare with a startup that worked.
As other has said, just answer CANCEL if you do not not need MQseries.
As other has said, just answer CANCEL if you do not not need MQseries.
- willy jensen
- Posts: 455
- Joined: Thu Mar 10, 2016 5:03 pm
- Has thanked: 0 time
- Been thanked: 69 times
Re: Message appears in Console Terminal
by rogerb » Tue Aug 07, 2018 8:34 pm
Good afternoon everybody.
First of all, thank you for all your answers.
Mr. Enrico-Sorichetti asked me to post the virtual mainframe configuration.
I looked in the internet and I found the following IBM page:
https://www.ibm.com/support/knowledgece ... 00/d3m.htm
By writing DISPLAY M I in the Console Terminal see the following:
Probably this does not help you, but that was the only page I found about displaying configuration.
I also looked about MQ Series and I found the following wikipedia page:
https://en.wikipedia.org/wiki/IBM_WebSphere_MQ
If this page is describing the same Middleware that you've mentioned earlier, I know I can CANCEL the job with confidence.
Thanks to everybody,
Roger
First of all, thank you for all your answers.
Mr. Enrico-Sorichetti asked me to post the virtual mainframe configuration.
I looked in the internet and I found the following IBM page:
https://www.ibm.com/support/knowledgece ... 00/d3m.htm
By writing DISPLAY M I in the Console Terminal see the following:
Probably this does not help you, but that was the only page I found about displaying configuration.
I also looked about MQ Series and I found the following wikipedia page:
https://en.wikipedia.org/wiki/IBM_WebSphere_MQ
If this page is describing the same Middleware that you've mentioned earlier, I know I can CANCEL the job with confidence.
Thanks to everybody,
Roger
Re: Message appears in Console Terminal
by enrico-sorichetti » Tue Aug 07, 2018 8:46 pm
zares1, zasys1
Websphere MQSeries 7.0.0
is that enough ?
add the stupid reply about the virtual mainframe configuration ?
and the idiotic mainframes serial numbers x12345yyyy
Websphere MQSeries 7.0.0
is that enough ?
add the stupid reply about the virtual mainframe configuration ?
and the idiotic mainframes serial numbers x12345yyyy
cheers
enrico
When I tell somebody to RTFM or STFW I usually have the page open in another tab/window of my browser,
so that I am sure that the information requested can be reached with a very small effort
enrico
When I tell somebody to RTFM or STFW I usually have the page open in another tab/window of my browser,
so that I am sure that the information requested can be reached with a very small effort
- enrico-sorichetti
- Global moderator
- Posts: 2994
- Joined: Fri Apr 18, 2008 11:25 pm
- Has thanked: 0 time
- Been thanked: 164 times
-
- Related topics
- Replies
- Views
- Last post
-
- alert in console
by kchidambara2 » Sun Aug 12, 2012 5:07 am - 5 Replies
- 3673 Views
- Last post by kchidambara2
Mon Aug 13, 2012 2:57 am
- alert in console
-
- Password reset - console
by jaggz » Thu Apr 12, 2012 10:28 am - 1 Replies
- 3594 Views
- Last post by enrico-sorichetti
Thu Apr 12, 2012 11:51 am
- Password reset - console
-
- Make an IPL from the console on a TEST system
by curios13579 » Thu Mar 26, 2009 8:39 am - 2 Replies
- 3699 Views
- Last post by aquarius
Wed Sep 16, 2009 6:51 pm
- Make an IPL from the console on a TEST system
-
- IKT030I message
by jaggz » Thu Nov 18, 2010 11:06 am - 2 Replies
- 2818 Views
- Last post by steve-myers
Thu Nov 18, 2010 10:08 pm
- IKT030I message
-
- Origin of IBM message codes
by trengri » Tue Sep 25, 2018 2:26 am - 6 Replies
- 2296 Views
- Last post by trengri
Wed Sep 26, 2018 1:19 am
- Origin of IBM message codes