paste issue



TSO Programming, ISPF, SDF, SDSF and PDF, FTP, TCP/IP Concepts, SNA & SNA/IP etc...

paste issue

Postby superbrano » Thu Jan 05, 2012 8:28 pm

Hello,

I wonder if you could help me with my issue.
I have a problem with the putting text into ispf.
When pasted it ignores boundaries between command and data field (pls see attachement).


I would be so thankful if you helped me.


Thanks and Regards,

Brani.
You do not have the required permissions to view the files attached to this post.
superbrano
 
Posts: 3
Joined: Thu Jan 05, 2012 8:21 pm
Has thanked: 0 time
Been thanked: 0 time

Re: paste issue

 

Re: paste issue

Postby BillyBoyo » Thu Jan 05, 2012 8:40 pm

Try using TE (Text Entry) in the number area. With NUMBER ON.
BillyBoyo
Global moderator
 
Posts: 3804
Joined: Tue Jan 25, 2011 12:02 am
Has thanked: 22 times
Been thanked: 264 times

Re: paste issue

Postby enrico-sorichetti » Thu Jan 05, 2012 8:41 pm

You might try to paste using the TE line command
( it will show a screen without the line numbers )

but the result might be fouled up by the diffrent line endings in the PC data
cheers
enrico
When I tell somebody to RTFM or STFW I usually have the page open in another tab/window of my browser,
so that I am sure that the information requested can be reached with a very small effort
enrico-sorichetti
Global moderator
 
Posts: 2644
Joined: Fri Apr 18, 2008 11:25 pm
Has thanked: 0 time
Been thanked: 130 times

Re: paste issue

Postby steve-myers » Thu Jan 05, 2012 8:52 pm

I'm just guessing here, but I think this is more an issue with your emulator.
steve-myers
Global moderator
 
Posts: 1886
Joined: Thu Jun 03, 2010 6:21 pm
Has thanked: 4 times
Been thanked: 197 times

Re: paste issue

Postby superbrano » Thu Jan 05, 2012 9:00 pm

Hi great thank ,
to both of you, really appreciate your help.
I've been working on this about week...and also ask for advice about 5 different people. But this is the first thing which actually works.
I've tried to change profile settings - i got it set the same way as my colleague did - and the paste works good for him.
The TE command really work!
Although when i put NUMBER ON then the same thing happens.

But at least i can finally put more than 1 row to ispf via paste...

Thanks one more time.

Best regards,


Brani.
superbrano
 
Posts: 3
Joined: Thu Jan 05, 2012 8:21 pm
Has thanked: 0 time
Been thanked: 0 time

Re: paste issue

Postby enrico-sorichetti » Thu Jan 05, 2012 9:03 pm

nope...
I stand by my opinion ( slightly reworded )
it depends where You paste from....

pasting lines from an editor window ( obviously with cr/lf )
will produce spurious blank lines

pasting lines from a forum post where no cr/lf are present
You might try to paste using the TE line command
( it will show a screen without the line numbers )

but the result might be fouled up by the diffrent line endings in the PC data

produces data exactly like the <source>
cheers
enrico
When I tell somebody to RTFM or STFW I usually have the page open in another tab/window of my browser,
so that I am sure that the information requested can be reached with a very small effort
enrico-sorichetti
Global moderator
 
Posts: 2644
Joined: Fri Apr 18, 2008 11:25 pm
Has thanked: 0 time
Been thanked: 130 times

Re: paste issue

Postby superbrano » Thu Jan 05, 2012 9:23 pm

sorry but i don't think this is the main issue. the issue is that paste works in edit field also - where it didn't before
superbrano
 
Posts: 3
Joined: Thu Jan 05, 2012 8:21 pm
Has thanked: 0 time
Been thanked: 0 time

Re: paste issue

Postby steve-myers » Thu Jan 05, 2012 9:34 pm

To return to my previous post. The terminal emulator I use, QWS3270, has two copy/paste modes, "Line mode" and "Block mode." The default appears to be "Line mode," which works like s****. Finding the right place to set block mode is difficult, but well worth the effort. Paste from Windoze Notepad works perfectly in QWS block mode, as does paste to Windoze Notepad from QWS.
steve-myers
Global moderator
 
Posts: 1886
Joined: Thu Jun 03, 2010 6:21 pm
Has thanked: 4 times
Been thanked: 197 times


Return to TSO & ISPF

 


  • Related topics
    Replies
    Views
    Last post