Unable to see job and where to reset



TSO Programming, ISPF, SDF, SDSF and PDF, FTP, TCP/IP Concepts, SNA & SNA/IP etc...

Unable to see job and where to reset

Postby atodpquery » Thu Nov 19, 2009 8:18 am

Have you got an idea how and where to reset the line as I cannot see my job in the sd;h or I or ST. The line is 0. see below:

 SDSF INPUT QUEUE DISPLAY ALL CLASSES                   LINE 0-0 (0)           
 COMMAND INPUT ===>                                            SCROLL ===> CSR 
 PREFIX=AAAAA*  DEST=(ALL)  OWNER=ALL  SYSNAME=                                 
 NP   JOBNAME  JobID    Owner    Prty C  Pos  PrtDest              Rmt  Node SAf



Your help will be greatly appreciated.
:P
atodpquery
 
Posts: 31
Joined: Sat Nov 15, 2008 3:40 pm
Has thanked: 0 time
Been thanked: 0 time

Re: Unable to see job and where to reset

Postby dick scherrer » Thu Nov 19, 2009 11:00 am

Hello,

You cannot "reset" the line as far as i know. . . The "line" is calculated from the displayed values. What is posted shows there are no matching jobs.

Did you try O (oh)?

You may need to talk with your Operations or Systems support for clarification.

The next time you submit one of these "mystery" jobs, issue an s.log and see what the system log shows for that job. If the log shows PURGED, it is gone.
Hope this helps,
d.sch.
User avatar
dick scherrer
Global moderator
 
Posts: 6268
Joined: Sat Jun 09, 2007 8:58 am
Has thanked: 3 times
Been thanked: 93 times

Re: Unable to see job and where to reset

Postby Bill Dennis » Thu Nov 19, 2009 10:43 pm

If you mean reset the display filter values line, enter command PREFIX to remove the jobname prefix mask of AAAAAA*.
Regards,

Bill Dennis

Disclaimer: My comments on this forum are my own and do not represent the opinions or suggestions of any other person or business entity.
Bill Dennis
 
Posts: 278
Joined: Thu May 15, 2008 9:45 pm
Has thanked: 0 time
Been thanked: 0 time


Return to TSO & ISPF

 


  • Related topics
    Replies
    Views
    Last post