need help: ISPF DTL ISPC045E: unable to format



TSO Programming, ISPF, SDF, SDSF and PDF, FTP, TCP/IP Concepts, SNA & SNA/IP etc...

need help: ISPF DTL ISPC045E: unable to format

Postby RDonadeo » Tue Mar 22, 2011 6:23 pm

Hello,
I hope someone could help me to understand which is wrong in the corean panel I'm trying to compile with ISPF DTL CONV Conversion utility.
I gote the same error both using the DTL compiler via dialog ispf or vi a batch like the following:

//DTLCOR JOB A0001,DONADEO,NOTIFY=DONADEO,
// MSGLEVEL=(1,1)
//******************************************************************
//* IEBGENER
//******************************************************************
//DTLCOMND EXEC PGM=IEBGENER,REGION=512K
//SYSPRINT DD SYSOUT=*
//SYSIN DD *
GENERATE MAXNAME=99
MEMBER NAME=DTLCONV
//SYSUT1 DD *
%ISPDTLC +
EQQSRCLP ( NOPREP LSTVIEW DSNCHK KOREAN PROFDDN=DTLPDDN DBCS
//SYSUT2 DD DSN=&&TMPCLIST(DTLCONV),UNIT=SYSDA,
// SPACE=(TRK,(1,1,2),RLSE),
// DISP=(NEW,PASS),DCB=(LRECL=080,BLKSIZE=3200,RECFM=FB)
....

The error is the following:

READY
PROFILE PREFIX(DONADEO)
READY
ISPSTART CMD(%DTLCONV)
ISPC021I: ISPDTLC ISPF 6.0 Dialog Tag Language Conversion Utility
ISPC020AI: ISPF Dialog Tag Language Conversion Utility for ISPF 6.0.
Current APAR level: PID. Current PTF number: 18 Dec 2007.
ISPC022I: Converting source file
"TWSDEV.TWSZ860.NEW.PANGML.COR(EQQSRCLP)"...
ISPC045E: Error. Line 51 of file "TWSDEV.TWSZ860.NEW.PANGML.COR(EQQSRCLP)".
Unable to format data. Reason code was "16".
ISPC029I: 0 warning(s) and 1 error(s) found.
DONADEO.DTLCOR.JOB00678.D0000106.? was preallocated (no free was done).
READY
END

If I look in ISPF messages and codes manual the explantion is that the message is self explanatory.
I understand that format of the panel failed but why is something I'm not able to understand.
there are no other messages issued.
The indicated line of the panel is the same prefectly working on the corresponding Japanese or English panel that is the last line of the panel: </panel> :


...
...
<source type=init>
</source>
<source type=proc>
</source>

<COMMENT TYPE=END>
******************************************************************
------------------------------------------------------------------
- PANEL NAME: EQQSRCLP -
- -
- CHANGES: -
- -
- $MOD(EQQSRCLP) COMP(PANELS) PROD(TWSZ): -
- -
- Flag Reason Rlse Date Origin Flag Description -
- ---- -------- ------ ------ ------ --------------------------- -
- $60= DCR0212 860 170610 DTLZ: new ISPF panels -
------------------------------------------------------------------
******************************************************************
</COMMENT>
</panel>

Can someone help me?
thanks
Rossella
RDonadeo
 
Posts: 3
Joined: Tue Mar 22, 2011 4:43 pm
Has thanked: 0 time
Been thanked: 0 time

Re: need help: ISPF DTL ISPC045E: unable to format

Postby Robert Sample » Tue Mar 22, 2011 6:53 pm

ISPC045E: Error. Line 51 of file "TWSDEV.TWSZ860.NEW.PANGML.COR(EQQSRCLP)".
This does not give you a clue where to start looking? If you're not able to parse such a direct error message, identify the line of the data set involved, and go to that data set to look at that line -- (1) we certainly cannot do so since we don't have the data set, and (2) you really need to find a career more suited for you than IT, as the error messages can be much harder to interpret and your failure to understand this one does NOT bode well for your future success.
Robert Sample
Global moderator
 
Posts: 3719
Joined: Sat Dec 19, 2009 8:32 pm
Location: Dubuque, Iowa, USA
Has thanked: 1 time
Been thanked: 279 times

Re: need help: ISPF DTL ISPC045E: unable to format

Postby RDonadeo » Tue Mar 22, 2011 7:34 pm

Hello,
Probably this is not the right Forum for this kind of questions.
Sorry if I am so stupid. Obviosly I checked the line but I was not able to understand why the following line:

000051 </panel>
4698989644444444444444
C171553E00000000000000

was causing formatting problem.
Probably I should change career, but really I do not understand why people find so amusing humiliate other people ...
Thanks for your kindness
Ciao,
Rossella
RDonadeo
 
Posts: 3
Joined: Tue Mar 22, 2011 4:43 pm
Has thanked: 0 time
Been thanked: 0 time

Re: need help: ISPF DTL ISPC045E: unable to format

Postby prino » Wed Mar 23, 2011 12:59 am

Robert Sample wrote:
ISPC045E: Error. Line 51 of file "TWSDEV.TWSZ860.NEW.PANGML.COR(EQQSRCLP)".
This does not give you a clue where to start looking? If you're not able to parse such a direct error message, identify the line of the data set involved, and go to that data set to look at that line -- (1) we certainly cannot do so since we don't have the data set, and (2) you really need to find a career more suited for you than IT, as the error messages can be much harder to interpret and your failure to understand this one does NOT bode well for your future success.

Be fair, if you use LookAt for this message, it will tell you abso-fluck-ingly nothing.
Robert AH Prins
robert.ah.prins @ the.17+Gb.Google thingy
User avatar
prino
 
Posts: 635
Joined: Wed Mar 11, 2009 12:22 am
Location: Vilnius, Lithuania
Has thanked: 3 times
Been thanked: 28 times

Re: need help: ISPF DTL ISPC045E: unable to format

Postby BillyBoyo » Wed Mar 23, 2011 5:26 am

"In the message listing, the line numbers displayed in the messages might not always match the line numbers of the source file that caused the message. This occurs because the conversion utility must sometimes continue to read the source file until it encounters an end tag or a new tag before issuing a message. You should be able to determine which source line created the message by examining the DTL source file."

I found this from IBM, error messages in the index of the document for the product. The program has been sore confused with something, and has got to the end of your file, so that it why it points to the last line. There is nothing wrong with your
</panel> but there is something earlier, which apparently, "you should be able to determine". Sorry, but so far there is an error in one of the other 50 lines. Like a start without an end, I don't know. Start at the top and work down I guess. Don't know why it works with English and Japanese. Same input? If you can't see anything, try to locate by breaking the input into smaller parts maybe.
BillyBoyo
Global moderator
 
Posts: 3804
Joined: Tue Jan 25, 2011 12:02 am
Has thanked: 22 times
Been thanked: 265 times

Re: need help: ISPF DTL ISPC045E: unable to format

Postby RDonadeo » Wed Mar 23, 2011 7:27 pm

Hello,
thanks to BillyBoyo for the information and to have spent his time to help me :-).
I received another suggestion about the maintentance level of the z/OS system where I am running the DTL utility and a lot of important APAR were missing.
In particular the OA23682: REASON CODE 16 BEING RETURNED WHEN DOING A BUILD ON KOREAN PANELS.
As I got this error for all the korean panels I tried to compile I think it could fix my problem.
I'm waiting for z/OS environment update but I think this is the probable root.
Thanks a lot for your help
Ciao,
Rossella
RDonadeo
 
Posts: 3
Joined: Tue Mar 22, 2011 4:43 pm
Has thanked: 0 time
Been thanked: 0 time


Return to TSO & ISPF

 


  • Related topics
    Replies
    Views
    Last post