Page 1 of 1

IEA995I SYMPTOM DUMP

PostPosted: Tue Sep 11, 2012 3:51 pm
by sambath
Please some one help me to fix this abend..


IEA995I SYMPTOM DUMP OUTPUT 042
SYSTEM COMPLETION CODE=0C4 REASON CODE=00000004
TIME=09.38.32 SEQ=41318 CPU=0000 ASID=060A
PSW AT TIME OF ERROR 478D2000 80B9F2D2 ILC 4 INTC 04
NO ACTIVE MODULE FOUND
NAME=UNKNOWN
DATA AT PSW 00B9F2CC - C4645871 000041E0 703815EF
AR/GR 0: 00000000/00000000_25164CE8 1: 00000002/00000000
2: 00000000/000008A4_00000014 3: 00000000/000008A4
4: 00000000/00000000_0001F3D0 5: 00000000/00000000
6: 00000000/00000000_0010A6A0 7: 00000000/00000000
8: 00000000/00000000_00016110 9: 00000000/00000000
A: 00000000/00000000_00016158 B: 00000000/00000000
C: 00000000/00000000_00B9F118 D: 00000000/00000000
E: 00000000/00000000_80B9F25A F: 00000000/00000000
END OF SYMPTOM DUMP

Re: IEA995I SYMPTOM DUMP

PostPosted: Tue Sep 11, 2012 4:46 pm
by NicC
Welcome to the forum. One of our rules is to post in the correct section. Your post has nothing to do with JCL but all to do with debugging. I have moved it.

What have you discovered so far about your problem? What you have posted is of no value to anyone by itself.

Before starting another topic please take time to familiarise yourself with the layout and rules of the forum.

Re: IEA995I SYMPTOM DUMP

PostPosted: Tue Sep 11, 2012 5:00 pm
by Robert Sample
The 0C4 system completion code means a storage violation occurred -- the program is attempting to access storage it does not have access to. This particular problem has many, many, many possible causes such as table overflow, addressing mode incompatibility, attempting to use a file before it is open or after it is closed, etc. You have posted nothing that would allow us to help you resolve the issue. Contact your site support group for more assistance.

Re: IEA995I SYMPTOM DUMP

PostPosted: Tue Sep 11, 2012 9:43 pm
by steve-myers
This topic has an extended discussion of z/OS symptom dumps.

However, as NicC says, this discussion may not help. A very quick perusal of your problem suggests to me your program took a wild branch.

Re: IEA995I SYMPTOM DUMP

PostPosted: Wed Sep 12, 2012 12:31 am
by dick scherrer
Hello and welcome to the forum,

Which program was executing at the time of the abend? Is this a program written locally or part of some vendor code?

Re: IEA995I SYMPTOM DUMP

PostPosted: Wed Sep 12, 2012 3:15 pm
by sambath
Hi all,
Thanks for your reply.. I'm new to this , going forward i will post my doubt in detail manner..

Re: IEA995I SYMPTOM DUMP

PostPosted: Wed Sep 12, 2012 8:40 pm
by dick scherrer
Hello,

going forward i will post my doubt in detail manner..
That would be good.

Is this resolved? If no, post info reauested.

If this is resolved, it would be good to post how it was fixed - as it might help another with a similar problem one day.