File/record lenth mismatch



Support for OS/VS COBOL, VS COBOL II, COBOL for OS/390 & VM and Enterprise COBOL for z/OS

File/record lenth mismatch

Postby cwseay » Mon May 13, 2019 8:10 pm

How can I resolve this error:

ALLOCATE DDNAME(CUSTMAST) DSNAME(COBOL(CUSTMAST))
 READY                                                                          
ALLOCATE DDNAME (SALESRPT) DSNAME(*)                                            
 READY                                                                          
CALL LANG.LOAD(RPT1000)                                                        
 IGZ0201W A file attribute mismatch was detected. File CUSTMAST in program RPT10
00 had a record length of 43 and the                                            
          file specified in the ASSIGN clause had a record length of 80.        
 IGZ0035S There was an unsuccessful OPEN or CLOSE of file CUSTMAST in program RP
T1000 at relative location X'1B8'.                                              
          Neither FILE STATUS nor an ERROR declarative were specified. The statu
s code was 39.                                                                  
          From compile unit RPT1000 at entry point RPT1000 at compile unit offse
t +000001B8 at entry offset +000001B8                                          
          at address 1ED011B8.  


Here is the source code:
      IDENTIFICATION DIVISION.

       PROGRAM-ID. RPT1000.

       ENVIRONMENT DIVISION.

       INPUT-OUTPUT SECTION.

       FILE-CONTROL.

           SELECT CUSTMAST ASSIGN TO CUSTMAST.
           SELECT SALESRPT ASSIGN TO SALESRPT.

       DATA DIVISION.

       FILE SECTION.

       FD  CUSTMAST.

       01  CUSTOMER-MASTER-RECORD.
           05  CM-BRANCH-NUMBER        PIC 9(2).
           05  CM-SALESREP-NUMBER      PIC 9(2).
           05  CM-CUSTOMER-NUMBER      PIC 9(5).
           05  CM-CUSTOMER-NAME        PIC X(20).
           05  CM-SALES-THIS-YTD       PIC S9(5)V9(2).
           05  CM-SALES-LAST-YTD       PIC S9(5)V9(2).

       FD  SALESRPT.

       01  PRINT-AREA      PIC X(132).

       WORKING-STORAGE SECTION.

       01  SWITCHES.
           05  CUSTMAST-EOF-SWITCH     PIC X    VALUE "N".

       01  PRINT-FIELDS.
           05  PAGE-COUNT      PIC S9(3)   VALUE ZERO.
           05  LINES-ON-PAGE   PIC S9(3)   VALUE +55.
           05  LINE-COUNT      PIC S9(3)   VALUE +99.
           05  SPACE-CONTROL   PIC S9.

       01  TOTAL-FIELDS.
           05  GRAND-TOTAL-THIS-YTD   PIC S9(7)V99   VALUE ZERO.
           05  GRAND-TOTAL-LAST-YTD   PIC S9(7)V99   VALUE ZERO.

       01  CURRENT-DATE-AND-TIME.
           05  CD-YEAR         PIC 9999.
           05  CD-MONTH        PIC 99.
           05  CD-DAY          PIC 99.
           05  CD-HOURS        PIC 99.
           05  CD-MINUTES      PIC 99.
           05  FILLER          PIC X(9).

       01  HEADING-LINE-1.
           05  FILLER          PIC X(7)    VALUE "DATE:  ".
           05  HL1-MONTH       PIC 9(2).
           05  FILLER          PIC X(1)    VALUE "/".
           05  HL1-DAY         PIC 9(2).
           05  FILLER          PIC X(1)    VALUE "/".
           05  HL1-YEAR        PIC 9(4).
           05  FILLER          PIC X(11)   VALUE SPACE.
           05  FILLER          PIC X(20)   VALUE "YEAR-TO-DATE SALES R".
           05  FILLER          PIC X(20)   VALUE "EPORT               ".
           05  FILLER          PIC X(8)    VALUE "  PAGE: ".
           05  Hl1-PAGE-NUMBER PIC ZZZ9.
           05  FILLER          PIC X(52)   VALUE SPACE.

       01  HEADING-LINE-2.
           05  FILLER          PIC X(7)    VALUE "TIME:  ".
           05  HL2-HOURS       PIC 9(2).
           05  FILLER          PIC X(1)    VALUE ":".
           05  HL2-MINUTES     PIC 9(2).
           05  FILLER          PIC X(58)   VALUE SPACE.
           05  FILLER          PIC X(10)   VALUE "RPT1000".
           05  FILLER          PIC X(52)   VALUE SPACE.

       01  HEADING-LINE-3.
           05  FILLER      PIC X(20)   VALUE "CUST                ".
           05  FILLER      PIC X(20)   VALUE "            SALES   ".
           05  FILLER      PIC X(20)   VALUE "      SALES         ".
           05  FILLER      PIC X(72)   VALUE SPACE.

       01  HEADING-LINE-4.
           05  FILLER      PIC X(20)   VALUE "NUM    CUSTOMER NAME".
           05  FILLER      PIC X(20)   VALUE "           THIS YTD ".
           05  FILLER      PIC X(20)   VALUE "     LAST YTD       ".
           05  FILLER      PIC X(72)   VALUE SPACE.

       01  CUSTOMER-LINE.
           05  CL-CUSTOMER-NUMBER  PIC 9(5).
           05  FILLER              PIC X(2)     VALUE SPACE.
           05  CL-CUSTOMER-NAME    PIC X(20).
           05  FILLER              PIC X(3)     VALUE SPACE.
           05  CL-SALES-THIS-YTD   PIC ZZ,ZZ9.99-.
           05  FILLER              PIC X(4)     VALUE SPACE.
           05  CL-SALES-LAST-YTD   PIC ZZ,ZZ9.99-.
           05  FILLER              PIC X(78)    VALUE SPACE.

       01  GRAND-TOTAL-LINE.
           05  FILLER              PIC X(27)    VALUE SPACE.
           05  GTL-SALES-THIS-YTD  PIC Z,ZZZ,ZZ9.99-.
           05  FILLER              PIC X(1)     VALUE SPACE.
           05  GTL-SALES-LAST-YTD  PIC Z,ZZZ,ZZ9.99-.
           05  FILLER              PIC X(78)    VALUE SPACE.

       PROCEDURE DIVISION.

       000-PREPARE-SALES-REPORT.

           OPEN INPUT  CUSTMAST
                OUTPUT SALESRPT.
           PERFORM 100-FORMAT-REPORT-HEADING.
           PERFORM 200-PREPARE-SALES-LINES
               UNTIL CUSTMAST-EOF-SWITCH = "Y".
           PERFORM 300-PRINT-GRAND-TOTALS.
           CLOSE CUSTMAST
                 SALESRPT.
           STOP RUN.

       100-FORMAT-REPORT-HEADING.

           MOVE FUNCTION CURRENT-DATE TO CURRENT-DATE-AND-TIME.
           MOVE CD-MONTH   TO HL1-MONTH.
           MOVE CD-DAY     TO HL1-DAY.
           MOVE CD-YEAR    TO HL1-YEAR.
           MOVE CD-HOURS   TO HL2-HOURS.
           MOVE CD-MINUTES TO HL2-MINUTES.

       200-PREPARE-SALES-LINES.

           PERFORM 210-READ-CUSTOMER-RECORD.
           IF CUSTMAST-EOF-SWITCH = "N"
               PERFORM 220-PRINT-CUSTOMER-LINE.

       210-READ-CUSTOMER-RECORD.

           READ CUSTMAST
               AT END
                   MOVE "Y" TO CUSTMAST-EOF-SWITCH.

       220-PRINT-CUSTOMER-LINE.

           IF LINE-COUNT >= LINES-ON-PAGE
               PERFORM 230-PRINT-HEADING-LINES.
           MOVE CM-CUSTOMER-NUMBER  TO CL-CUSTOMER-NUMBER.
           MOVE CM-CUSTOMER-NAME    TO CL-CUSTOMER-NAME.
           MOVE CM-SALES-THIS-YTD   TO CL-SALES-THIS-YTD.
           MOVE CM-SALES-LAST-YTD   TO CL-SALES-LAST-YTD.
           MOVE CUSTOMER-LINE TO PRINT-AREA.
           WRITE PRINT-AREA AFTER ADVANCING SPACE-CONTROL LINES.
           ADD 1 TO LINE-COUNT.
           ADD CM-SALES-THIS-YTD TO GRAND-TOTAL-THIS-YTD.
           ADD CM-SALES-LAST-YTD TO GRAND-TOTAL-LAST-YTD.
           MOVE 1 TO SPACE-CONTROL.

       230-PRINT-HEADING-LINES.

           ADD 1 TO PAGE-COUNT.
           MOVE PAGE-COUNT     TO HL1-PAGE-NUMBER.
           MOVE HEADING-LINE-1 TO PRINT-AREA.
           WRITE PRINT-AREA AFTER ADVANCING PAGE.
           MOVE HEADING-LINE-2 TO PRINT-AREA.
           WRITE PRINT-AREA AFTER ADVANCING 1 LINES.
           MOVE HEADING-LINE-3 TO PRINT-AREA.
           WRITE PRINT-AREA AFTER ADVANCING 2 LINES.
           MOVE HEADING-LINE-4 TO PRINT-AREA.
           WRITE PRINT-AREA AFTER ADVANCING 1 LINES.
           MOVE ZERO TO LINE-COUNT.
           MOVE 2 TO SPACE-CONTROL.

       300-PRINT-GRAND-TOTALS.

           MOVE GRAND-TOTAL-THIS-YTD TO GTL-SALES-THIS-YTD.
           MOVE GRAND-TOTAL-LAST-YTD TO GTL-SALES-LAST-YTD.
           MOVE GRAND-TOTAL-LINE     TO PRINT-AREA.
           WRITE PRINT-AREA AFTER ADVANCING 2 LINES.



Thanks!
cwseay
 
Posts: 16
Joined: Thu Oct 05, 2017 8:28 am
Has thanked: 4 times
Been thanked: 0 time

Re: File/record lenth mismatch

 

Re: File/record lenth mismatch

Postby Robert Sample » Mon May 13, 2019 8:46 pm

Add a 37-byte FILLER after CM-SALES-LAST-YTD.

Or, re-create your data set as LRECL 43 instead of 80.

Either will fix the problem; which you do is up to you.
Robert Sample
Global moderator
 
Posts: 3603
Joined: Sat Dec 19, 2009 8:32 pm
Location: Dubuque, Iowa, USA
Has thanked: 1 time
Been thanked: 264 times


Return to IBM Cobol

 


  • Related topics
    Replies
    Views
    Last post