RMDS



Post anything related to mainframes (IBM & UNISYS) if not fit in any of the above categories

RMDS

Postby pillai » Fri Jan 15, 2010 11:07 pm

Hi all,

We use RMDS in mainframe as our report management system.
We do fullpack back-up of all RMDS packs every night. As the data is growing this back-up takes longer hours and hence we have a batch window issue.
I am wondering if we have an option or product to do incremental back-up of RMDS packs.

Thanks.
pillai
 
Posts: 6
Joined: Sat Jan 31, 2009 12:28 am
Has thanked: 0 time
Been thanked: 0 time

Re: RMDS

Postby Robert Sample » Sat Jan 16, 2010 12:02 am

Contact the vendor for support.
Robert Sample
Global moderator
 
Posts: 3720
Joined: Sat Dec 19, 2009 8:32 pm
Location: Dubuque, Iowa, USA
Has thanked: 1 time
Been thanked: 279 times

Re: RMDS

Postby pillai » Sat Jan 16, 2010 1:06 am

We did. Vendor doesn't have a solution.
pillai
 
Posts: 6
Joined: Sat Jan 31, 2009 12:28 am
Has thanked: 0 time
Been thanked: 0 time

Re: RMDS

Postby dick scherrer » Sat Jan 16, 2010 1:10 am

Hello,

What software is being used to create the backup?

What media is being written to for the backup?
Hope this helps,
d.sch.
User avatar
dick scherrer
Global moderator
 
Posts: 6268
Joined: Sat Jun 09, 2007 8:58 am
Has thanked: 3 times
Been thanked: 93 times

Re: RMDS

Postby Robert Sample » Sat Jan 16, 2010 1:48 am

We used Tivoli a while back and it could do incremental backups -- but I don't know if it could do incremental backups of RMDS.

DF/DSS is an option -- we use parallel mode to back up two 3390 mod 3 disk packs at a time and it averages about 9 minutes per pair of packs to back them up (each pack is roughly 75% full).
Robert Sample
Global moderator
 
Posts: 3720
Joined: Sat Dec 19, 2009 8:32 pm
Location: Dubuque, Iowa, USA
Has thanked: 1 time
Been thanked: 279 times

Re: RMDS

Postby pillai » Sat Jan 16, 2010 4:14 am

We use DFDSS to do the pack backup.
we also average 8 to 9 min for a 3390 mod 3.
As we have too many packs the timing becomes a issue.
pillai
 
Posts: 6
Joined: Sat Jan 31, 2009 12:28 am
Has thanked: 0 time
Been thanked: 0 time

Re: RMDS

Postby dick scherrer » Sat Jan 16, 2010 4:34 am

Hello,

To Repeat:
What media is being written to for the backup?


The new "fat" tapes/ ecart devices are considerably faster than the 3480/3490 carts if they are not already being used. I don't remember the "numbers". . . :?
Hope this helps,
d.sch.
User avatar
dick scherrer
Global moderator
 
Posts: 6268
Joined: Sat Jun 09, 2007 8:58 am
Has thanked: 3 times
Been thanked: 93 times

Re: RMDS

Postby Robert Sample » Sat Jan 16, 2010 5:16 am

It sounds like your site needs to do a major analysis effort. If the jobs are I/O bound, you may be able to reduce timing by spreading workload across the channels evenly . If the jobs are CPU bound, you could look at running when the CPU is less busy. If neither of these ideas work, you r site may need to spend some money to upgrade (tape drives to use newest models as Dick suggested, or DASD to allow disk-to-disk copies instead of disk-to-tape, or perhaps a CPU upgrade). Since your pack backup times seem reasonable, there may not be much we can suggest -- only someone very familiar with your site could make suggestions based on analyzing the SMF data.
Robert Sample
Global moderator
 
Posts: 3720
Joined: Sat Dec 19, 2009 8:32 pm
Location: Dubuque, Iowa, USA
Has thanked: 1 time
Been thanked: 279 times


Return to All other Mainframe Topics