unable to copy data from main frame screen to pc



Post anything related to mainframes (IBM & UNISYS) if not fit in any of the above categories

unable to copy data from main frame screen to pc

Postby surime72 » Thu Aug 16, 2012 6:26 pm

hi ,
i was trying to copy data from mainframe screen to pc it was getting error messag as
EZZ9830I TID FTP failed - Cmd = 10(open) Reply = n/a EX STD RC = 10000:
EZY2640I Using 'SYS1.TCPPARMS(FTPDATA)' for local site configuration parameters
EZA1450I IBM FTP CS V1R11                                                     
EZA1466I FTP: using TCPIP                                                     
EZA1772I FTP: EXIT has been set.                                               
EZA1456I Connect to ?                                                         
EZA1736I 172.28.1.129                                                         
EZA1554I Connecting to:    port: 21.                               
EZA2589E Connection to server interrupted or timed out. Initial connection     
EZA1735I Std Return Code = 10000, Error Code = 00008                           



i was tried through the option 3.7

1 ISPF C/S
2 Data Set
here i was selected 1 by pressing enter it asks ip address and login and password
by giving above details it shows above error msg
so is there any other way to copy mainframe screen to our pc
surime72
 
Posts: 107
Joined: Sun Oct 23, 2011 1:45 pm
Has thanked: 0 time
Been thanked: 0 time

Re: unable to copy data from main frame screen to pc

Postby Robert Sample » Thu Aug 16, 2012 6:36 pm

Did you see the warning on the screen that says using FTP requires a workstation server? Almost no desktop PC machines run server software and most sites prohibit server software on desktop machines. Since your desktop is not a server, you cannot open it in an FTP session -- hence the error message you got.
Robert Sample
Global moderator
 
Posts: 3720
Joined: Sat Dec 19, 2009 8:32 pm
Location: Dubuque, Iowa, USA
Has thanked: 1 time
Been thanked: 279 times

Re: unable to copy data from main frame screen to pc

Postby dick scherrer » Thu Aug 16, 2012 7:58 pm

Hello,

To get the data from the mainframe to the pc, you can "pull" the data to the pc rather than "push" it from the mainframe. . .
Hope this helps,
d.sch.
User avatar
dick scherrer
Global moderator
 
Posts: 6268
Joined: Sat Jun 09, 2007 8:58 am
Has thanked: 3 times
Been thanked: 93 times

Re: unable to copy data from main frame screen to pc

Postby steve-myers » Fri Aug 17, 2012 12:10 am

I'm going to rephrase Mr. Scherrer's English to try to make things a little clearer.

Mr. Sample said most PCs do not have an FTP "server" installed on the machine; in fact many sites forbid the casual installation of an FTP server on client systems. Having done this, I cannot argue about the wisdom of this policy. This means you cannot use a mainframe FTP "client" to transfer data from the mainframe to your PC.

There are two things you can do.

Almost all Windows machines have a line mode FTP "client" installed on the machine that operates within the Windows command prompt application. IF your site runs the MVS FTP server - not all do - you can use the Windows FTP client to signon to the mainframe FTP server and transfer your data that way.

Almost all 3270 emulator programs have a file transfer process that you can use to transfer data. It is usually called from a drop down menu in the application; the exact details depend on the 3270 emulator. The IBM PCOMM 3270 emulator also provides the TRANSMIT and RECEIVE commands you can use in a Windoze command prompt window. Well, it did 12 years ago, the last time I used PCOMM; I presume it still does. The 3270 file transfer is not real fast, paricularly compared with FTP, but it gets the job done. As with the command prompt FTP client, the file transfer is requested by the PC, not by the mainframe
steve-myers
Global moderator
 
Posts: 2105
Joined: Thu Jun 03, 2010 6:21 pm
Has thanked: 4 times
Been thanked: 243 times

Re: unable to copy data from main frame screen to pc

Postby surime72 » Fri Aug 17, 2012 9:47 am

Hi guys thank u for replying there is an option tranfer
by clicking on transfer it shows option
send
receive
configure
ftp


here i was not unable select the option FTP but i can able to select other option send,receive,configure
by slecting these options i can able to open other window
i dont know how to upload my screen shot to these forum
surime72
 
Posts: 107
Joined: Sun Oct 23, 2011 1:45 pm
Has thanked: 0 time
Been thanked: 0 time

Re: unable to copy data from main frame screen to pc

Postby dick scherrer » Fri Aug 17, 2012 7:44 pm

Hello,

i dont know how to upload my screen shot to these forum
If this is data on a "3270" screen, simply copy/paste the data on the screen into a reply and then apply the Code tag to preserve alignment. There is a Prefiew function so you can see your post the way it will appear to the forum (rather than how it looks in the reply editor). When it looks as you want, Submit.
Hope this helps,
d.sch.
User avatar
dick scherrer
Global moderator
 
Posts: 6268
Joined: Sat Jun 09, 2007 8:58 am
Has thanked: 3 times
Been thanked: 93 times

Re: unable to copy data from main frame screen to pc

Postby surime72 » Tue Aug 21, 2012 3:45 pm

hi
PFA
these the option showing but here FTP is not in select mode and by selecting the option it open one more pop up [lease find second screen in same attachment
You do not have the required permissions to view the files attached to this post.
surime72
 
Posts: 107
Joined: Sun Oct 23, 2011 1:45 pm
Has thanked: 0 time
Been thanked: 0 time

Re: unable to copy data from main frame screen to pc

Postby dick scherrer » Tue Aug 21, 2012 11:40 pm

Hello,

Now, you need to do as told earlier and copy/paste the screen data into a reply . . . Use the Code tag. Use Preview.

Many of the users here are not permitted to download attachments. . .

Suggest you also consider using the ftp client (rather then the terminal emulator) on your pc to download the file from the mainframe. . .
Hope this helps,
d.sch.
User avatar
dick scherrer
Global moderator
 
Posts: 6268
Joined: Sat Jun 09, 2007 8:58 am
Has thanked: 3 times
Been thanked: 93 times

Re: unable to copy data from main frame screen to pc

Postby surime72 » Wed Aug 22, 2012 5:11 pm

hi,

i was attached the screen shots,

but i dont know how to copy the screens and paste in the portal.please let me know if u know the process...
surime72
 
Posts: 107
Joined: Sun Oct 23, 2011 1:45 pm
Has thanked: 0 time
Been thanked: 0 time

Re: unable to copy data from main frame screen to pc

Postby dick scherrer » Wed Aug 22, 2012 8:46 pm

Hello,

copy/paste the screen data into a reply . . . Use the Code tag. Use Preview.
What is not clear with this?

When the data you want to post is on your screen, highlight the entire screen (top left to bottom right), right-clidk and Copy. Then go to a reply for the forum, right-click and Paste. Then highlight the info in the reply and click Code. Then click Preview and you will see your post as it will appear to the forum. Then Submit when your post liike like you want.
Hope this helps,
d.sch.
User avatar
dick scherrer
Global moderator
 
Posts: 6268
Joined: Sat Jun 09, 2007 8:58 am
Has thanked: 3 times
Been thanked: 93 times


Return to All other Mainframe Topics

 


  • Related topics
    Replies
    Views
    Last post