Comparing data fields



Support for OS/VS COBOL, VS COBOL II, COBOL for OS/390 & VM and Enterprise COBOL for z/OS

Comparing data fields

Postby chuckfoss » Sat Oct 17, 2009 3:19 am

Hi - I'm having trouble comparing these 2 fields in my COBOL program:

Field1 = '000012345'
Field2 = '12345 '

Each is PIC X(9). Field2 has spaces after 12345.

Any suggestions?
Thanks.
Chuck
chuckfoss
 
Posts: 4
Joined: Sat Oct 17, 2009 3:09 am
Has thanked: 0 time
Been thanked: 0 time

Re: Comparing data fields

Postby swd » Sat Oct 17, 2009 10:14 am

Chuck,

There are various things you can do to these fields such as using the INSPECT or UNSTRING COBOL verbs to manipulate your fields and strip out spaces or leading zeroes etc. This would then leave you with the two fields containing '12345', which would then compare OK. But is this what you want to do? The solution depends on what you are trying to achieve. If you have 2 PIC X(9) character fields that contain numeric data then should these fields really be PIC 9(9) fields?

Is the data example you give typical of the contents of fields, or could they contain many other values? Sorry my answer is a bit vague, but it would be good to know a bit more about what you trying to achieve. You can manipulate fields until your heart is content, but then does that invalidate the input data?
User avatar
swd
 
Posts: 109
Joined: Wed Feb 18, 2009 9:18 pm
Location: UK
Has thanked: 0 time
Been thanked: 0 time

Re: Comparing data fields

Postby chuckfoss » Sat Oct 17, 2009 6:53 pm

SWD,

Thanks for your reply. Actually, field one is a PIC S9(9) field (000012345) and field two is PIC X(10) field (12345bbbbb) b=space. I have moved field one to a PIC X field in order to compare. The problem is that field two gets left justified before coming into my program. Both values represent an insurance code so they truly are equal.

Thanks for your help.
Chuck
chuckfoss
 
Posts: 4
Joined: Sat Oct 17, 2009 3:09 am
Has thanked: 0 time
Been thanked: 0 time

Re: Comparing data fields

Postby chuckfoss » Sat Oct 17, 2009 6:54 pm

SWD,

Thanks for your reply. Actually, field one is a PIC S9(9) field (000012345) and field two is PIC X(10) field (12345bbbbb) b=space. I have moved field one to a PIC X field in order to compare. The problem is that field two gets left justified before coming into my program. Both values represent an insurance code so they truly are equal.

Thanks for your help.
Chuck
chuckfoss
 
Posts: 4
Joined: Sat Oct 17, 2009 3:09 am
Has thanked: 0 time
Been thanked: 0 time

Re: Comparing data fields

Postby swd » Sat Oct 17, 2009 9:46 pm

OK, I'm still not really sure what you are trying to do, but it sounds like you are moving your field1 (000012345) numeric field to a character field2 '12345bbbbb' and then comparing field1 and field2? And as field2 is a PIC X field it left justifies the field and has trailing spaces, so the 2 fields don't match. This is as one would expect.

If this is you question (I may be totally barking up the wrong tree here!) then you could UNSTRING the field 2 into a numerc field and then compare.. something like this..

 
       IDENTIFICATION DIVISION.
       PROGRAM-ID. FORUM.
       ENVIRONMENT DIVISION.
       CONFIGURATION SECTION.
       DATA DIVISION.
       WORKING-STORAGE SECTION.

       01  WS-TEST-VAR-X                 PIC X(10).
       01  WS-TEST-VAR-9UST              PIC S9(9).
       01  WS-TEST-VAR-9                 PIC S9(9).

       LINKAGE SECTION.
       PROCEDURE DIVISION.
       MAIN-PROCESS SECTION.
      ******************************************************************
      *                        MAIN PROCESSING                         *
      ******************************************************************
           MOVE 12345                   TO WS-TEST-VAR-9
           MOVE 12345                   TO WS-TEST-VAR-X

           UNSTRING WS-TEST-VAR-X DELIMITED BY ALL SPACES
            INTO WS-TEST-VAR-9UST
           END-UNSTRING

           IF WS-TEST-VAR-9UST EQUAL TO WS-TEST-VAR-9
               DISPLAY 'OK'
           ELSE
               DISPLAY 'NOT OK'
           END-IF

           STOP RUN
           .

       MAIN-999-EXIT.
           EXIT.


The 2 fields will compare OK then. Does this help you in any way? I may have mis-understood your question, if so apologies and please post more detail.

Cheers
Steve.
User avatar
swd
 
Posts: 109
Joined: Wed Feb 18, 2009 9:18 pm
Location: UK
Has thanked: 0 time
Been thanked: 0 time

Re: Comparing data fields

Postby dick scherrer » Sun Oct 18, 2009 12:34 am

Hello,

Is your goal to compare the numeric value? Will the pic x field always be valid?

You mention a sign (s9(9)) but the posted data shows no sign - if field1 had a sign the value would be 00001234E as the sign of a zoned-decimal number is the high-order nibble (1/2 byte) of the low-order byte.

If the pic x field will always be valid and you want to compare the numeric value, use the NUMVAL function and move the pic x field to another s9(9) field. Then compare the 2 pic s9(9) fields.

Possibly i misunderstand something - if so, please clarify.
Hope this helps,
d.sch.
User avatar
dick scherrer
Global moderator
 
Posts: 6268
Joined: Sat Jun 09, 2007 8:58 am
Has thanked: 3 times
Been thanked: 93 times

Re: Comparing data fields

Postby chuckfoss » Mon Nov 02, 2009 4:10 am

Hi D.SCH., I solved the problem by using your suggestion of the NUMVAL Function.
Thank you VERY much!

Chuck
chuckfoss
 
Posts: 4
Joined: Sat Oct 17, 2009 3:09 am
Has thanked: 0 time
Been thanked: 0 time

Re: Comparing data fields

Postby dick scherrer » Tue Nov 03, 2009 1:19 am

You're welcome - good to hear it is working - thanks for letting us know :)

Do keep in mind that if the pic x field ever contains other than a valid numeric, there will be an abend. . .

If the value was generated by a computer, it will most likely be ok.

d
User avatar
dick scherrer
Global moderator
 
Posts: 6268
Joined: Sat Jun 09, 2007 8:58 am
Has thanked: 3 times
Been thanked: 93 times


Return to IBM Cobol

 


  • Related topics
    Replies
    Views
    Last post