GQSCAN



High Level Assembler(HLASM) for MVS & VM & VSE

Re: GQSCAN

Postby JPVRoff » Wed Nov 16, 2011 12:23 pm

enrico-sorichetti wrote:please do not double post

which was locked and deleted
the people answering are mostly the same, so double posting will not get You more answers

anyway the cbt tape at http://www.cbttape.org" onclick="window.open(this.href);return false; has quite a few examples of GQSCAN usage
GQSCAN was found 789 times in 92 files
( in the cbt sources I downloaded, since they are not the latest ones, there might be more occurrences )

enrico,

It wasn't intended to be a double post. I posted in here initially and then read the heading "A Help & Support Forum for Mainframe Beginners and Students". So I then reinstated (with dick's help) my id on the other site. I then posted there. My apologies, but I did include other information on that other post.

However, to get back to the original question (and now that I am limited to the beginners section), the 789 examples on the cbttape and all the others that I've found (as well as the manuals, etc) only go as far as to indicate that SCOPE=ALL should allow GQSCAN to search across LPARs. It does not on our site. So, I am guessing that the inplementation of CA-MIM may require that GQSCAN is limited on the systems that MIM is running on (for what reason I cannot fathom). But a look in the manuals for MIM does not indicate this one way or the other.
Regards,
Jonathan

"Calm down, it's only ones and zeros" © Kathy Mar, 1985
User avatar
JPVRoff
 
Posts: 14
Joined: Mon Nov 07, 2011 11:15 am
Has thanked: 0 time
Been thanked: 0 time

Re: GQSCAN

Postby dick scherrer » Wed Nov 16, 2011 11:58 pm

Hi Jonathan,

It looks like you are still good to go on the other forum.

Let us know if there are any problems there.

d
ps - did a bit of cleanup and deleted one of my replies. . .
User avatar
dick scherrer
Global moderator
 
Posts: 6268
Joined: Sat Jun 09, 2007 8:58 am
Has thanked: 3 times
Been thanked: 93 times

Re: GQSCAN

Postby JPVRoff » Thu Nov 17, 2011 7:29 am

Thanks, Dick.

I might try steve-myers solution for this problem. Although agricultural, it would work - I'd just have to collect the results from a few different jobs. Or, I might just give up on collecting the information via a WHOHAS program, and just attempt to assign it - if that fails I just don't attempt to modify it (as obviously someone is using it).

WRT the other site, I can post successfully, so that's no problem. I just don't have another query at present.
Regards,
Jonathan

"Calm down, it's only ones and zeros" © Kathy Mar, 1985
User avatar
JPVRoff
 
Posts: 14
Joined: Mon Nov 07, 2011 11:15 am
Has thanked: 0 time
Been thanked: 0 time

Previous

Return to Assembler