One: the program is complaining about missing DD statements
05.12.14 JOB02503 IEC130I G.INPUT DD STATEMENT MISSING
05.12.14 JOB02503 IEC130I G.OUTPUT DD STATEMENT MISSING
Also, it says "no active module found." Do you see the problem? Thx.
DD Statements and Missing Modules
DD Statements and Missing Modules
by RISCCISCInstSet » Fri Sep 21, 2012 4:23 pm
I've tried to find the answer to my problem all over and have lost sleep so I think I can ask my question here.
One: the program is complaining about missing DD statements
05.12.14 JOB02503 IEC130I G.INPUT DD STATEMENT MISSING
05.12.14 JOB02503 IEC130I G.OUTPUT DD STATEMENT MISSING
Also, it says "no active module found." Do you see the problem? Thx.
One: the program is complaining about missing DD statements
05.12.14 JOB02503 IEC130I G.INPUT DD STATEMENT MISSING
05.12.14 JOB02503 IEC130I G.OUTPUT DD STATEMENT MISSING
Also, it says "no active module found." Do you see the problem? Thx.
You do not have the required permissions to view the files attached to this post.
RISCCISCInstSet
-
RISCCISCInstSet - Posts: 121
- Joined: Mon Oct 17, 2011 1:46 pm
- Has thanked: 146 times
- Been thanked: 0 time
Re: DD Statements and Missing Modules
by Akatsukami » Fri Sep 21, 2012 4:41 pm
Yes. Step G in your proc is missing INPUT and OUTPUT DD statements.
"You have sat too long for any good you have been doing lately ... Depart, I say; and let us have done with you. In the name of God, go!" -- what I say to a junior programmer at least once a day
- These users thanked the author Akatsukami for the post:
- RISCCISCInstSet (Mon Nov 12, 2012 4:53 am)
-
Akatsukami - Global moderator
- Posts: 1058
- Joined: Sat Oct 16, 2010 2:31 am
- Location: Bloomington, IL
- Has thanked: 6 times
- Been thanked: 51 times
Re: DD Statements and Missing Modules
by BillyBoyo » Fri Sep 21, 2012 6:51 pm
You've actually named your files G.INPUT and G.OUTPUT in the Assembler program.
You are trying to "override" step G to get ddnames of INPUT and OUTPUT. Your Assembler program needs to know nothing of those attempts. Change your program and let us know what happens when next you run it.
You are trying to "override" step G to get ddnames of INPUT and OUTPUT. Your Assembler program needs to know nothing of those attempts. Change your program and let us know what happens when next you run it.
- These users thanked the author BillyBoyo for the post:
- RISCCISCInstSet (Sun Sep 23, 2012 10:17 am)
- BillyBoyo
- Global moderator
- Posts: 3804
- Joined: Tue Jan 25, 2011 12:02 am
- Has thanked: 22 times
- Been thanked: 265 times
Re: DD Statements and Missing Modules
by NicC » Fri Sep 21, 2012 6:55 pm
Cannot say apart from the fact you are missing DD statements for your input and output data sets. If this is the case then it is a JCL problem and not an assembler language problem.
It may, or may not, help if you actually post what is in your attachement as many cannot download (company policy) or will not download (fear of viruses or just cannot be bothered, etc.).
It may, or may not, help if you actually post what is in your attachement as many cannot download (company policy) or will not download (fear of viruses or just cannot be bothered, etc.).
The problem I have is that people can explain things quickly but I can only comprehend slowly.
Regards
Nic
Regards
Nic
- These users thanked the author NicC for the post:
- RISCCISCInstSet (Sat Sep 22, 2012 7:23 am)
- NicC
- Global moderator
- Posts: 3025
- Joined: Sun Jul 04, 2010 12:13 am
- Location: Pushing up the daisies (almost)
- Has thanked: 4 times
- Been thanked: 136 times
Re: DD Statements and Missing Modules
by BillyBoyo » Fri Sep 21, 2012 7:43 pm
NicC, the input in the Assembler is called "G.INPUT". The output is called "G.OUTPUT". I've looked. Then you can't get DD names for those - invalid.
- These users thanked the author BillyBoyo for the post (total 2):
- RISCCISCInstSet (Mon Nov 12, 2012 4:54 am) • NicC (Sat Sep 22, 2012 7:30 pm)
- BillyBoyo
- Global moderator
- Posts: 3804
- Joined: Tue Jan 25, 2011 12:02 am
- Has thanked: 22 times
- Been thanked: 265 times
Re: DD Statements and Missing Modules
by NicC » Fri Sep 21, 2012 8:36 pm
Thanks Billy. Guessed it was that from your previous post. I am surprised that the assembler allowed that unless it is one of those emulators that allow you to assemble and run on toys in which case you need toy names capability.
The problem I have is that people can explain things quickly but I can only comprehend slowly.
Regards
Nic
Regards
Nic
- These users thanked the author NicC for the post:
- RISCCISCInstSet (Mon Nov 12, 2012 4:54 am)
- NicC
- Global moderator
- Posts: 3025
- Joined: Sun Jul 04, 2010 12:13 am
- Location: Pushing up the daisies (almost)
- Has thanked: 4 times
- Been thanked: 136 times
Re: DD Statements and Missing Modules
by BillyBoyo » Fri Sep 21, 2012 8:56 pm
Hey, when a Moderator says "thanks" I should at least expect it to show up 
- These users thanked the author BillyBoyo for the post:
- RISCCISCInstSet (Mon Nov 12, 2012 4:54 am)
- BillyBoyo
- Global moderator
- Posts: 3804
- Joined: Tue Jan 25, 2011 12:02 am
- Has thanked: 22 times
- Been thanked: 265 times
Re: DD Statements and Missing Modules
by steve-myers » Fri Sep 21, 2012 11:45 pm
Actually, the Assembler doesn't care about the contents of a DC CL8'G.OUTPUT'. The other question is question is how much - if any - syntax checking the DCB macro does for DDNAME=G.OUTPUT. I don't know. Finally, if the DD name is copied to the DCB before the OPEN; e.g., your program does -
MVC DCBDDNAM,=CL8'G.OUTPUT'
the DCB macro can't check it, and obviously OPEN didn't check it for a syntax violation, and it didn't find a DD statement with that DD name, so it failed the allocation.
DFSMS Macro Instructions for Data Sets does not specify any syntax rules, so the presumption is the DCB macro doesn't do any syntax checking.
The description for DALDDNAM in MVS Authorized Assembler Services Guide just defines a max length of 8, but no other restrictions. This implies you could specify G.OUTPUT, but I'm not going to try it!
MVC DCBDDNAM,=CL8'G.OUTPUT'
the DCB macro can't check it, and obviously OPEN didn't check it for a syntax violation, and it didn't find a DD statement with that DD name, so it failed the allocation.
DFSMS Macro Instructions for Data Sets does not specify any syntax rules, so the presumption is the DCB macro doesn't do any syntax checking.
The description for DALDDNAM in MVS Authorized Assembler Services Guide just defines a max length of 8, but no other restrictions. This implies you could specify G.OUTPUT, but I'm not going to try it!
- These users thanked the author steve-myers for the post:
- RISCCISCInstSet (Sun Sep 23, 2012 10:16 am)
- steve-myers
- Global moderator
- Posts: 2105
- Joined: Thu Jun 03, 2010 6:21 pm
- Has thanked: 4 times
- Been thanked: 243 times
Re: DD Statements and Missing Modules
by steve-myers » Sat Sep 22, 2012 12:58 am
As for the NO ACTIVE MODULE FOUND in the summary dump. Most likely, the address of the error is something like 000052. This address is in low storage, not in a module in your job pack area. Summary dump is too stupid to try to determine the module in your job pack area by looking at reg 14. That's why you got NO ACTIVE MODULE FOUND.
- These users thanked the author steve-myers for the post:
- RISCCISCInstSet (Sun Sep 23, 2012 10:17 am)
- steve-myers
- Global moderator
- Posts: 2105
- Joined: Thu Jun 03, 2010 6:21 pm
- Has thanked: 4 times
- Been thanked: 243 times
Re: DD Statements and Missing Modules
by RISCCISCInstSet » Sat Sep 22, 2012 5:45 am
@NicC thanks.
Files re-uploaded outside of a zip file.
If you have trouble viewing them, use Wordpad.
Attachments removed and Code'd. Relevant part of sysout only.
Files re-uploaded outside of a zip file.
If you have trouble viewing them, use Wordpad.
//C432110A JOB (ASSY),CLASS=A,MSGCLASS=A,
// NOTIFY=&SYSUID,MSGLEVEL=(1,1)
//**************//
//CLG EXEC PROC=ASMACLG
//C.SYSIN DD DSN=C432110.ASM(LAB03),DISP=SHR
//C.SYSLIB DD DSN=SYS1.MACLIB,DISP=SHR
// DD DSN=C432110.MACLIB,DISP=SHR
//G.INPUT DD DSN=C432110.ASM(LAB03),
// DISP=SHR
//G.OUTPUT DD DSN=C432110.ASM(COPY),
// DISP=SHR
// NOTIFY=&SYSUID,MSGLEVEL=(1,1)
//**************//
//CLG EXEC PROC=ASMACLG
//C.SYSIN DD DSN=C432110.ASM(LAB03),DISP=SHR
//C.SYSLIB DD DSN=SYS1.MACLIB,DISP=SHR
// DD DSN=C432110.MACLIB,DISP=SHR
//G.INPUT DD DSN=C432110.ASM(LAB03),
// DISP=SHR
//G.OUTPUT DD DSN=C432110.ASM(COPY),
// DISP=SHR
COPY SETUP
TITLE 'PROGRAM 4 80/80 LISTING'
PRINT NOGEN
WTO 'PROG4 COPY INFILE (ASCII) TO OUTFILE (ASCII)'
OPEN (INFILE,INPUT)
OPEN (OUTFILE,OUTPUT)
WTO 'Files opened successfully'
*
LOOP EQU *
GET INFILE,IRECORD
MVC ORECORD,=CL133' '
MVC ORECORD+10(62),IRECORD
PACK NUM,CHAR
AP NUM,NUM2
OI NUM+2,X'0F'
UNPK CHAR,NUM(4)
MVC ORECORD(10),CHAR
PUT OUTFILE,ORECORD
B LOOP
*
EOF EQU *
CLOSE (INFILE,,OUTFILE)
WTO 'PROG4 ENDED OK'
ENDIT
INFILE DCB BLKSIZE=1330, X
DDNAME=G.INPUT, X
DSORG=PS, X
RECFM=FBA, X
LRECL=80, X
EODAD=EOF, X
MACRF=GM
*
OUTFILE DCB BLKSIZE=1330, X
DDNAME=G.OUTPUT, X
DSORG=PS, X
RECFM=FBA, X
LRECL=72, X
MACRF=PM
*
CHAR DC C'10'
NUM DS PL4
NUM2 DC P'1'
IRECORD DC CL80' '
ORECORD DC CL72' '
END COPY
TITLE 'PROGRAM 4 80/80 LISTING'
PRINT NOGEN
WTO 'PROG4 COPY INFILE (ASCII) TO OUTFILE (ASCII)'
OPEN (INFILE,INPUT)
OPEN (OUTFILE,OUTPUT)
WTO 'Files opened successfully'
*
LOOP EQU *
GET INFILE,IRECORD
MVC ORECORD,=CL133' '
MVC ORECORD+10(62),IRECORD
PACK NUM,CHAR
AP NUM,NUM2
OI NUM+2,X'0F'
UNPK CHAR,NUM(4)
MVC ORECORD(10),CHAR
PUT OUTFILE,ORECORD
B LOOP
*
EOF EQU *
CLOSE (INFILE,,OUTFILE)
WTO 'PROG4 ENDED OK'
ENDIT
INFILE DCB BLKSIZE=1330, X
DDNAME=G.INPUT, X
DSORG=PS, X
RECFM=FBA, X
LRECL=80, X
EODAD=EOF, X
MACRF=GM
*
OUTFILE DCB BLKSIZE=1330, X
DDNAME=G.OUTPUT, X
DSORG=PS, X
RECFM=FBA, X
LRECL=72, X
MACRF=PM
*
CHAR DC C'10'
NUM DS PL4
NUM2 DC P'1'
IRECORD DC CL80' '
ORECORD DC CL72' '
END COPY
1 //C432110A JOB (ASSY),CLASS=A,MSGCLASS=A, JOB02504
// NOTIFY=&SYSUID,MSGLEVEL=(1,1)
//**************//
IEFC653I SUBSTITUTION JCL - (ASSY),CLASS=A,MSGCLASS=A,NOTIFY=C432110,MSGLEVEL=(1,1)
2 //CLG EXEC PROC=ASMACLG
3 XXASMACLG PROC 00001000
XX* 00002000
XX*** ASMACLG 00003000
XX* 00004000
XX* THIS PROCEDURE RUNS THE HIGH LEVEL ASSEMBLER, LINK-EDITS THE 00005000
XX* NEWLY ASSEMBLED PROGRAM AND RUNS THE PROGRAM AFTER 00006000
XX* THE LINK-EDIT IS ACCOMPLISHED. 00007000
XX* 00008000
4 XXC EXEC PGM=ASMA90 00009000
5 //C.SYSLIB DD DSN=SYS1.MACLIB,DISP=SHR
X/SYSLIB DD DSN=SYS1.MACLIB,DISP=SHR 00010000
6 // DD DSN=C432110.MACLIB,DISP=SHR
7 XXSYSUT1 DD DSN=&&SYSUT1,SPACE=(4096,(120,120),,,ROUND),UNIT=VIO, 00011000
XX DCB=BUFNO=1 00012000
8 XXSYSPRINT DD SYSOUT=* 00013000
9 XXSYSLIN DD DSN=&&OBJ,SPACE=(3040,(40,40),,,ROUND),UNIT=VIO, 00014000
XX DISP=(MOD,PASS), 00015000
XX DCB=(BLKSIZE=3040,LRECL=80,RECFM=FBS,BUFNO=1) 00016000
10 //C.SYSIN DD DSN=C432110.ASM(LAB03),DISP=SHR
11 XXL EXEC PGM=HEWL,PARM='MAP,LET,LIST',COND=(8,LT,C) 00017000
12 XXSYSLIN DD DSN=&&OBJ,DISP=(OLD,DELETE) 00018000
13 XX DD DDNAME=SYSIN 00019000
14 XXSYSLMOD DD DISP=(,PASS),UNIT=SYSDA,SPACE=(CYL,(1,1,1)), 00020000
XX DSN=&&GOSET(GO) 00021000
15 XXSYSUT1 DD DSN=&&SYSUT1,SPACE=(1024,(120,120),,,ROUND),UNIT=VIO, 00022000
XX DCB=BUFNO=1 00023000
16 XXSYSPRINT DD SYSOUT=* 00024000
17 XXG EXEC PGM=*.L.SYSLMOD,COND=((8,LT,C),(8,LT,L)) 00025000
18 //G.INPUT DD DSN=C432110.ASM(LAB03),
// DISP=SHR
19 //G.OUTPUT DD DSN=C432110.ASM(COPY),
// DISP=SHR
STMT NO. MESSAGE
2 IEFC001I PROCEDURE ASMACLG WAS EXPANDED USING SYSTEM LIBRARY SYS1.PROCLIB
17 IEF686I DDNAME REFERRED TO ON DDNAME KEYWORD IN PRIOR STEP WAS NOT RESOLVED
ICH70001I C432110 LAST ACCESS AT 05:12:14 ON FRIDAY, SEPTEMBER 21, 2012
IEF236I ALLOC. FOR C432110A C CLG
IEF237I 1001 ALLOCATED TO SYSLIB
IEF237I 0D33 ALLOCATED TO
IGD100I VIO ALLOCATED TO DDNAME SYSUT1 DATACLAS ( )
IEF237I JES2 ALLOCATED TO SYSPRINT
IGD100I VIO ALLOCATED TO DDNAME SYSLIN DATACLAS ( )
IEF237I 0D33 ALLOCATED TO SYSIN
IEF142I C432110A C CLG - STEP WAS EXECUTED - COND CODE 0000
IEF285I SYS1.MACLIB KEPT
IEF285I VOL SER NOS= VTMVSC.
IEF285I C432110.MACLIB KEPT
IEF285I VOL SER NOS= VPWRKB.
IEF285I SYS12265.T054040.RA000.C432110A.SYSUT1.H01 DELETED
IEF285I C432110.C432110A.JOB02504.D0000101.? SYSOUT
IEF285I SYS12265.T054040.RA000.C432110A.OBJ.H01 PASSED
IEF285I C432110.ASM KEPT
IEF285I VOL SER NOS= VPWRKB.
IEF373I STEP/C /START 2012265.0540
IEF032I STEP/C /STOP 2012265.0540
CPU: 0 HR 00 MIN 00.05 SEC SRB: 0 HR 00 MIN 00.00 SEC
VIRT: 228K SYS: 256K EXT: 32768K SYS: 11964K
IEF236I ALLOC. FOR C432110A L CLG
IEF237I VIO ALLOCATED TO SYSLIN
IEF237I DMY ALLOCATED TO
IGD100I VIO ALLOCATED TO DDNAME SYSLMOD DATACLAS ( )
IGD100I VIO ALLOCATED TO DDNAME SYSUT1 DATACLAS ( )
IEF237I JES2 ALLOCATED TO SYSPRINT
IEF142I C432110A L CLG - STEP WAS EXECUTED - COND CODE 0000
IEF285I SYS12265.T054040.RA000.C432110A.OBJ.H01 DELETED
IEF285I SYS12265.T054040.RA000.C432110A.GOSET.H01 PASSED
IEF285I SYS12265.T054040.RA000.C432110A.SYSUT1.H01 DELETED
IEF285I C432110.C432110A.JOB02504.D0000102.? SYSOUT
IEF373I STEP/L /START 2012265.0540
IEF032I STEP/L /STOP 2012265.0540
CPU: 0 HR 00 MIN 00.01 SEC SRB: 0 HR 00 MIN 00.00 SEC
VIRT: 104K SYS: 260K EXT: 1768K SYS: 11108K
IEF236I ALLOC. FOR C432110A G CLG
IEF237I VIO ALLOCATED TO PGM=*.DD
IEF237I 0D33 ALLOCATED TO INPUT
IEF237I 0D33 ALLOCATED TO OUTPUT
PROG4 COPY INFILE (ASCII) TO OUTFILE (ASCII)
IEC130I G.INPUT DD STATEMENT MISSING
IEC130I G.OUTPUT DD STATEMENT MISSING
Files opened successfully
IEA995I SYMPTOM DUMP OUTPUT
SYSTEM COMPLETION CODE=0C4 REASON CODE=00000011
TIME=05.40.41 SEQ=00773 CPU=0000 ASID=002E
PSW AT TIME OF ERROR 078D2000 00005000 ILC 2 INTC 11
NO ACTIVE MODULE FOUND
NAME=UNKNOWN
DATA AT PSW IS UNAVAILABLE AT THIS TIME
// NOTIFY=&SYSUID,MSGLEVEL=(1,1)
//**************//
IEFC653I SUBSTITUTION JCL - (ASSY),CLASS=A,MSGCLASS=A,NOTIFY=C432110,MSGLEVEL=(1,1)
2 //CLG EXEC PROC=ASMACLG
3 XXASMACLG PROC 00001000
XX* 00002000
XX*** ASMACLG 00003000
XX* 00004000
XX* THIS PROCEDURE RUNS THE HIGH LEVEL ASSEMBLER, LINK-EDITS THE 00005000
XX* NEWLY ASSEMBLED PROGRAM AND RUNS THE PROGRAM AFTER 00006000
XX* THE LINK-EDIT IS ACCOMPLISHED. 00007000
XX* 00008000
4 XXC EXEC PGM=ASMA90 00009000
5 //C.SYSLIB DD DSN=SYS1.MACLIB,DISP=SHR
X/SYSLIB DD DSN=SYS1.MACLIB,DISP=SHR 00010000
6 // DD DSN=C432110.MACLIB,DISP=SHR
7 XXSYSUT1 DD DSN=&&SYSUT1,SPACE=(4096,(120,120),,,ROUND),UNIT=VIO, 00011000
XX DCB=BUFNO=1 00012000
8 XXSYSPRINT DD SYSOUT=* 00013000
9 XXSYSLIN DD DSN=&&OBJ,SPACE=(3040,(40,40),,,ROUND),UNIT=VIO, 00014000
XX DISP=(MOD,PASS), 00015000
XX DCB=(BLKSIZE=3040,LRECL=80,RECFM=FBS,BUFNO=1) 00016000
10 //C.SYSIN DD DSN=C432110.ASM(LAB03),DISP=SHR
11 XXL EXEC PGM=HEWL,PARM='MAP,LET,LIST',COND=(8,LT,C) 00017000
12 XXSYSLIN DD DSN=&&OBJ,DISP=(OLD,DELETE) 00018000
13 XX DD DDNAME=SYSIN 00019000
14 XXSYSLMOD DD DISP=(,PASS),UNIT=SYSDA,SPACE=(CYL,(1,1,1)), 00020000
XX DSN=&&GOSET(GO) 00021000
15 XXSYSUT1 DD DSN=&&SYSUT1,SPACE=(1024,(120,120),,,ROUND),UNIT=VIO, 00022000
XX DCB=BUFNO=1 00023000
16 XXSYSPRINT DD SYSOUT=* 00024000
17 XXG EXEC PGM=*.L.SYSLMOD,COND=((8,LT,C),(8,LT,L)) 00025000
18 //G.INPUT DD DSN=C432110.ASM(LAB03),
// DISP=SHR
19 //G.OUTPUT DD DSN=C432110.ASM(COPY),
// DISP=SHR
STMT NO. MESSAGE
2 IEFC001I PROCEDURE ASMACLG WAS EXPANDED USING SYSTEM LIBRARY SYS1.PROCLIB
17 IEF686I DDNAME REFERRED TO ON DDNAME KEYWORD IN PRIOR STEP WAS NOT RESOLVED
ICH70001I C432110 LAST ACCESS AT 05:12:14 ON FRIDAY, SEPTEMBER 21, 2012
IEF236I ALLOC. FOR C432110A C CLG
IEF237I 1001 ALLOCATED TO SYSLIB
IEF237I 0D33 ALLOCATED TO
IGD100I VIO ALLOCATED TO DDNAME SYSUT1 DATACLAS ( )
IEF237I JES2 ALLOCATED TO SYSPRINT
IGD100I VIO ALLOCATED TO DDNAME SYSLIN DATACLAS ( )
IEF237I 0D33 ALLOCATED TO SYSIN
IEF142I C432110A C CLG - STEP WAS EXECUTED - COND CODE 0000
IEF285I SYS1.MACLIB KEPT
IEF285I VOL SER NOS= VTMVSC.
IEF285I C432110.MACLIB KEPT
IEF285I VOL SER NOS= VPWRKB.
IEF285I SYS12265.T054040.RA000.C432110A.SYSUT1.H01 DELETED
IEF285I C432110.C432110A.JOB02504.D0000101.? SYSOUT
IEF285I SYS12265.T054040.RA000.C432110A.OBJ.H01 PASSED
IEF285I C432110.ASM KEPT
IEF285I VOL SER NOS= VPWRKB.
IEF373I STEP/C /START 2012265.0540
IEF032I STEP/C /STOP 2012265.0540
CPU: 0 HR 00 MIN 00.05 SEC SRB: 0 HR 00 MIN 00.00 SEC
VIRT: 228K SYS: 256K EXT: 32768K SYS: 11964K
IEF236I ALLOC. FOR C432110A L CLG
IEF237I VIO ALLOCATED TO SYSLIN
IEF237I DMY ALLOCATED TO
IGD100I VIO ALLOCATED TO DDNAME SYSLMOD DATACLAS ( )
IGD100I VIO ALLOCATED TO DDNAME SYSUT1 DATACLAS ( )
IEF237I JES2 ALLOCATED TO SYSPRINT
IEF142I C432110A L CLG - STEP WAS EXECUTED - COND CODE 0000
IEF285I SYS12265.T054040.RA000.C432110A.OBJ.H01 DELETED
IEF285I SYS12265.T054040.RA000.C432110A.GOSET.H01 PASSED
IEF285I SYS12265.T054040.RA000.C432110A.SYSUT1.H01 DELETED
IEF285I C432110.C432110A.JOB02504.D0000102.? SYSOUT
IEF373I STEP/L /START 2012265.0540
IEF032I STEP/L /STOP 2012265.0540
CPU: 0 HR 00 MIN 00.01 SEC SRB: 0 HR 00 MIN 00.00 SEC
VIRT: 104K SYS: 260K EXT: 1768K SYS: 11108K
IEF236I ALLOC. FOR C432110A G CLG
IEF237I VIO ALLOCATED TO PGM=*.DD
IEF237I 0D33 ALLOCATED TO INPUT
IEF237I 0D33 ALLOCATED TO OUTPUT
PROG4 COPY INFILE (ASCII) TO OUTFILE (ASCII)
IEC130I G.INPUT DD STATEMENT MISSING
IEC130I G.OUTPUT DD STATEMENT MISSING
Files opened successfully
IEA995I SYMPTOM DUMP OUTPUT
SYSTEM COMPLETION CODE=0C4 REASON CODE=00000011
TIME=05.40.41 SEQ=00773 CPU=0000 ASID=002E
PSW AT TIME OF ERROR 078D2000 00005000 ILC 2 INTC 11
NO ACTIVE MODULE FOUND
NAME=UNKNOWN
DATA AT PSW IS UNAVAILABLE AT THIS TIME
Attachments removed and Code'd. Relevant part of sysout only.
RISCCISCInstSet
-
RISCCISCInstSet - Posts: 121
- Joined: Mon Oct 17, 2011 1:46 pm
- Has thanked: 146 times
- Been thanked: 0 time
-
- Related topics
- Replies
- Views
- Last post
-
- Authorisation Code - load Modules
by jaggz » Fri Aug 03, 2012 10:33 am - 3 Replies
- 3111 Views
- Last post by steve-myers
Sat Aug 04, 2012 9:21 am
- Authorisation Code - load Modules
-
- Test for missing DD statement from ALC
by JimStout » Wed Oct 13, 2021 10:33 pm - 8 Replies
- 2830 Views
- Last post by steve-myers
Sat Oct 16, 2021 8:59 pm
- Test for missing DD statement from ALC
-
- How to identify ASM load modules in a load lib
by Misha786 » Thu May 16, 2024 7:08 pm - 0 Replies
- 1523 Views
- Last post by Misha786
Thu May 16, 2024 7:08 pm
- How to identify ASM load modules in a load lib