I can't see my jobs on SDSF



TSO Programming, ISPF, SDF, SDSF and PDF, FTP, TCP/IP Concepts, SNA & SNA/IP etc...

I can't see my jobs on SDSF

Postby thiagorr » Wed Nov 26, 2008 9:25 am

Hi!
Why can't I see my jobs on the SDSF by issuing the following commands:
OWNER MYUSERNAME
H ALL


This should return the jobs output, right?
But nothing appears!

Thanks!
thiagorr
thiagorr
 
Posts: 12
Joined: Wed Sep 10, 2008 11:23 pm
Has thanked: 0 time
Been thanked: 0 time

Re: I can't see my jobs on SDSF

Postby dick scherrer » Wed Nov 26, 2008 9:42 am

Hello,

Suggest you talk with your system support people and they can tell you why you are having this problem.

As i mentioned in your other topic, you may have a bad job statement.

Note: When people post the same or related questions at the same time, one or the other is often deleted by moderators/admin.
Hope this helps,
d.sch.
User avatar
dick scherrer
Global moderator
 
Posts: 6268
Joined: Sat Jun 09, 2007 8:58 am
Has thanked: 3 times
Been thanked: 93 times

Re: I can't see my jobs on SDSF

Postby Bill Dennis » Wed Nov 26, 2008 7:33 pm

Do the SET DISPLAY command to see if any other filtering values are set.

Is your job in a HOLD sysout class?

Is your job still on the input queue? Didi you get a NOTIFY msg?
Regards,

Bill Dennis

Disclaimer: My comments on this forum are my own and do not represent the opinions or suggestions of any other person or business entity.
Bill Dennis
 
Posts: 278
Joined: Thu May 15, 2008 9:45 pm
Has thanked: 0 time
Been thanked: 0 time

Re: I can't see my jobs on SDSF

Postby thiagorr » Thu Nov 27, 2008 7:01 pm

The SET DISPLAY is ON.
I believe it's not on a HOLD class.
No JOB is listed on the INPUT queue.
And on the OUTPUT queue, there are a few jobs, but the jobs I executed by myself aren't.

The only way I could see anything related to the job is on the LOG command.

Dick, the system support people don't answer my questions, maybe because it's a contest. When I got any answer, it's too vague!

Thank you guys!
thiagorr
 
Posts: 12
Joined: Wed Sep 10, 2008 11:23 pm
Has thanked: 0 time
Been thanked: 0 time

Re: I can't see my jobs on SDSF

Postby chidams78 » Tue Dec 02, 2008 9:09 pm

Hi,

May be the filter is turned on. Just type the command FIL OFF.
Hope you might have already executed
OWNER <userid>
PRE *
chidams78
 
Posts: 16
Joined: Fri Sep 19, 2008 6:35 pm
Has thanked: 0 time
Been thanked: 0 time


Return to TSO & ISPF

 


  • Related topics
    Replies
    Views
    Last post