Missing IEF403I



TSO Programming, ISPF, SDF, SDSF and PDF, FTP, TCP/IP Concepts, SNA & SNA/IP etc...

Re: Missing IEF403I

Postby v1gnesh » Tue Feb 26, 2013 4:42 am

I don't see any 404's either. Where can I look to find such "exits"? A Control-O rule processes these 403 and 404's but again, it's exactly the same as that in another system.
I haven't unsuppressed them yet. Will report back when I do.

Thanks.
boyo
v1gnesh
 
Posts: 72
Joined: Wed Sep 28, 2011 8:24 pm
Has thanked: 1 time
Been thanked: 0 time

Re: Missing IEF403I

Postby enrico-sorichetti » Tue Feb 26, 2013 4:53 am

And like I said, jobs that run on a schedule still produce the msgid. I realize I'm not being very clear but please try to understand what I'm saying.


again I ask... what do You think the YES under the column headed SUPPRESS means ???

and why do You think that after somebody has told the system to suppress the message the same should be displayed anyway

read the system initialization and tuning about the details of the syntax of the MPFLSTxx parmlib member

here for example
http://publib.boulder.ibm.com/infocente ... mpflst.htm

when in one of Your posts You said the the MPFLST in use contained the IEF403I message
everybody believed that you had carried on the due diligence to try to understand the MPFLST implications
but unfortunately we were wrong
cheers
enrico
When I tell somebody to RTFM or STFW I usually have the page open in another tab/window of my browser,
so that I am sure that the information requested can be reached with a very small effort
enrico-sorichetti
Global moderator
 
Posts: 3002
Joined: Fri Apr 18, 2008 11:25 pm
Has thanked: 0 time
Been thanked: 164 times

Re: Missing IEF403I

Postby jaggz » Tue Feb 26, 2013 12:34 pm

Hello,

Thanks for the output shown for "D MPF". This is very clear and the Required MSGID has been under the suppress Field. Z/OS is acting as designed. If you believe if its not then you might have to analyze the historical log, it could be weekly log.. analyzing for each schedule. Then It would be also best if you can OPEN a case with Control O support folks and they might give you more insights based on the Product DUMP.(Analyzing the Dumps).

Jaggz
User avatar
jaggz
 
Posts: 356
Joined: Fri Jul 23, 2010 8:51 pm
Has thanked: 8 times
Been thanked: 5 times

Re: Missing IEF403I

Postby v1gnesh » Wed Feb 27, 2013 11:40 pm

Hi,

I updated MPF and this is the output now..

-D MPF
 IEE677I 12.14.40 MPF DISPLAY 765
 MESSAGE ID -MPF  SUPPRESS RETAIN AUTO  TOKEN      EXIT
IEF403I    -00   NO       YES    YES
IEF404I    -00   NO       YES    YES


What's more weird is.. a few jobs which were submitted today (by a team mate no less), have produced the msgid. But a few of us are still not able to successfully produce a msgid in the syslog.
boyo
v1gnesh
 
Posts: 72
Joined: Wed Sep 28, 2011 8:24 pm
Has thanked: 1 time
Been thanked: 0 time

Re: Missing IEF403I

Postby Pedro » Thu Feb 28, 2013 3:48 am

Make sure the same MPF settings are consistent throughout your sysplex. It could be that you and your colleague may log on to the same system but when you both submit a job, each job might run on a different system.

Check message $HASP373 for each job, which I think should indicate the SMF id of the system where your job ran.
Pedro Vera
User avatar
Pedro
 
Posts: 686
Joined: Thu Jul 31, 2008 9:59 pm
Location: Silicon Valley
Has thanked: 0 time
Been thanked: 53 times

Re: Missing IEF403I

Postby v1gnesh » Thu Feb 28, 2013 3:58 am

Hi Pedro,

They're running on the same system. This particular system where I'm facing this problem, is a stand-alone.
boyo
v1gnesh
 
Posts: 72
Joined: Wed Sep 28, 2011 8:24 pm
Has thanked: 1 time
Been thanked: 0 time

Re: Missing IEF403I

Postby v1gnesh » Thu Mar 07, 2013 1:23 am

Hi,

I was able to get it going after issuing these commands:

D OPDATA,MONITOR,FULL
SETCON MONITOR,JOBNAMES=ON
SETCON MONITOR,SESS=ON
SETCON MONITOR,STATUS=ON


Thanks for the suggestions!
boyo
v1gnesh
 
Posts: 72
Joined: Wed Sep 28, 2011 8:24 pm
Has thanked: 1 time
Been thanked: 0 time

Re: Missing IEF403I

Postby BillyBoyo » Thu Mar 07, 2013 1:35 am

Thanks for letting us know.
BillyBoyo
Global moderator
 
Posts: 3804
Joined: Tue Jan 25, 2011 12:02 am
Has thanked: 22 times
Been thanked: 265 times

Previous

Return to TSO & ISPF

 


  • Related topics
    Replies
    Views
    Last post