How to create Tape file with Retention Period of 99 years



Help for IBM's record-oriented filesystem VSAM, ESDS, KSDS, RRDS, LDS and Storage management Subsystems

How to create Tape file with Retention Period of 99 years

Postby sganja » Wed Feb 06, 2013 9:16 pm

Hi All,

I am trying to create a Tape files with retention period of 99 years from a monthly job. Following is the scenario.
Eg:
Job runs on year : retention period(year)
2013 : 2112
2014 : 2113

Known key words are RETPD and EXPDT
RETPD: is supporting upto 27 years only.
EXPDT : With using of EXPDT=99000, Its became like hard coding of retention period which is not the case I required.

Please let me know is there any other key words available which can satisfy my requirement. Please help in creating a tape files with retention period of 99 years from the date of execution of job.
sganja
 
Posts: 13
Joined: Wed Feb 06, 2013 8:58 pm
Has thanked: 1 time
Been thanked: 0 time

Re: How to create Tape file with Retention Period of 99 year

Postby Akatsukami » Wed Feb 06, 2013 9:27 pm

There are no other keywords, as a brief perusal of the JCL Reference would have told you. Note that specifying EXPDT=99000 does not retain the tape for 99 years; this is an invalid date which has significance to various tape management systems. If you really find coding the expiration too tedious for words, your scheduling package or, at worst, a programette or a *Sort control card ought to modify it suitably.
"You have sat too long for any good you have been doing lately ... Depart, I say; and let us have done with you. In the name of God, go!" -- what I say to a junior programmer at least once a day
User avatar
Akatsukami
Global moderator
 
Posts: 1058
Joined: Sat Oct 16, 2010 2:31 am
Location: Bloomington, IL
Has thanked: 6 times
Been thanked: 51 times

Re: How to create Tape file with Retention Period of 99 year

Postby steve-myers » Wed Feb 06, 2013 10:03 pm

  • It used to be that data on tape deteriorated fairly quickly. After a few years (5?) the chances of retrieving the data became quite low. Sometime in the last 10 years I recall reading an article about a project to retrieve data from tapes created in the 1960s had quite a lot of trouble with
    • Media deterioration.
    • The data was recorded in EBCDIC, but they were using ASCII machines.
    • Finding tape drives that would read the tapes was difficult.
    • Documentation about the format of the data was poor.
  • It seems to me that tape drives in 2112 (if tape type technology is still being used) will not be able to read the tape.
steve-myers
Global moderator
 
Posts: 2105
Joined: Thu Jun 03, 2010 6:21 pm
Has thanked: 4 times
Been thanked: 243 times

Re: How to create Tape file with Retention Period of 99 year

Postby sganja » Wed Feb 06, 2013 10:13 pm

I Agree with you Steve. But its is the requirement and hv to satisfy it :) . We are searching for different options to get it done.

Hi Akatsukami,
I tried with EXPDT= 99002, 99360. Tapes are getting created but every time the retention is fixing to 2099 year only. its not picking to 2112.

What other design can we implement to get it done.
sganja
 
Posts: 13
Joined: Wed Feb 06, 2013 8:58 pm
Has thanked: 1 time
Been thanked: 0 time

Re: How to create Tape file with Retention Period of 99 year

Postby Akatsukami » Wed Feb 06, 2013 10:19 pm

EXPDT is expiration date, not retention period. Unless you have windowing options set, a 2-digit year will be implicitly prefixed with "20", thus the behavior that you see.

As I said, write a tiny piece of Rexx or a *Sort control card to modify the JCL.
"You have sat too long for any good you have been doing lately ... Depart, I say; and let us have done with you. In the name of God, go!" -- what I say to a junior programmer at least once a day
User avatar
Akatsukami
Global moderator
 
Posts: 1058
Joined: Sat Oct 16, 2010 2:31 am
Location: Bloomington, IL
Has thanked: 6 times
Been thanked: 51 times

Re: How to create Tape file with Retention Period of 99 year

Postby Robert Sample » Wed Feb 06, 2013 10:32 pm

If your site is using a tape management system, find out how to code a tape for permanent retention. This is not going to be 99 years, but then there is no way that I am aware of under the current z/OS environment to accomplish what you want to do, anyway.

And back in the 80's I had to access some tapes that were 5 to 10 years old. IIRC, the success rate for reading tapes 5 to 10 years old was about 40% -- and it dropped off as the tape aged. Realistically, if your tapes are readable in the year 2023, you will be very lucky -- forget 2112.
Robert Sample
Global moderator
 
Posts: 3720
Joined: Sat Dec 19, 2009 8:32 pm
Location: Dubuque, Iowa, USA
Has thanked: 1 time
Been thanked: 279 times

Re: How to create Tape file with Retention Period of 99 year

Postby Akatsukami » Wed Feb 06, 2013 10:49 pm

Robert Sample wrote:If your site is using a tape management system, find out how to code a tape for permanent retention.

I don't believe that a tape management system is required; the bogus date 99366 is interpreted as "never scratch",
"You have sat too long for any good you have been doing lately ... Depart, I say; and let us have done with you. In the name of God, go!" -- what I say to a junior programmer at least once a day
User avatar
Akatsukami
Global moderator
 
Posts: 1058
Joined: Sat Oct 16, 2010 2:31 am
Location: Bloomington, IL
Has thanked: 6 times
Been thanked: 51 times

Re: How to create Tape file with Retention Period of 99 year

Postby steve-myers » Wed Feb 06, 2013 11:02 pm

EXPDT=2113/001 might work.
steve-myers
Global moderator
 
Posts: 2105
Joined: Thu Jun 03, 2010 6:21 pm
Has thanked: 4 times
Been thanked: 243 times

Re: How to create Tape file with Retention Period of 99 year

Postby sganja » Wed Feb 06, 2013 11:14 pm

Expdt=99366 is just like non exist date and tape dataset will never get delete.
EXPDT=2113/001 is hard coding the date. It will work for today. If the job executed after 1 month this option will not be correct.
sganja
 
Posts: 13
Joined: Wed Feb 06, 2013 8:58 pm
Has thanked: 1 time
Been thanked: 0 time

Re: How to create Tape file with Retention Period of 99 year

Postby Akatsukami » Wed Feb 06, 2013 11:18 pm

Ribbono shel Olam! I can't believe, even in this day and age, that no one at your site is capable of handling so trivial a piece of programming :roll: What does your JCL have, if anything, for EXPDT or RETPD now?
"You have sat too long for any good you have been doing lately ... Depart, I say; and let us have done with you. In the name of God, go!" -- what I say to a junior programmer at least once a day
User avatar
Akatsukami
Global moderator
 
Posts: 1058
Joined: Sat Oct 16, 2010 2:31 am
Location: Bloomington, IL
Has thanked: 6 times
Been thanked: 51 times

Next

Return to VSAM/SMS

 


  • Related topics
    Replies
    Views
    Last post