FSUM9225 no memory: EDC5132I Not enough memory



JES, JES2, JCL utilities, IDCAMS, Compile & Run JCLs, PROCs etc...

Re: FSUM9225 no memory: EDC5132I Not enough memory

Postby v1gnesh » Wed Jul 25, 2012 8:13 am

dick scherrer wrote:Hello,

Hopefully "someone" (scheduling, operations, system support) may have some notes on how things were configured last time.

Maybe there are also some footprints as to what has changed on the system since then (new releases of the operating environment, SAP, etc).

Good luck :)


Nope. If there were notes, the guy himself would have made a note of it. :(
(I'm a part of their system support)
boyo
v1gnesh
 
Posts: 72
Joined: Wed Sep 28, 2011 8:24 pm
Has thanked: 1 time
Been thanked: 0 time

Re: FSUM9225 no memory: EDC5132I Not enough memory

Postby jaggz » Wed Jul 25, 2012 8:20 am

Hi,

This Could be problems may be causing excessive ECSA consumption.In these cases, increasing ECSA to an appropriate amount will resolve the problem but you have to determine the right level of ECSA allocation.

HTH

Jaggz
User avatar
jaggz
 
Posts: 356
Joined: Fri Jul 23, 2010 8:51 pm
Has thanked: 8 times
Been thanked: 5 times

Re: FSUM9225 no memory: EDC5132I Not enough memory

Postby jaggz » Wed Jul 25, 2012 8:32 am

Hi,

Adding to the above since the OMVS runs on TSO so probably you might even have to look at your TSO size, in our shop for running few java exec I Do keep a larger TSO size.
So whats your current TSO region Size ?

Jaggz
User avatar
jaggz
 
Posts: 356
Joined: Fri Jul 23, 2010 8:51 pm
Has thanked: 8 times
Been thanked: 5 times

Re: FSUM9225 no memory: EDC5132I Not enough memory

Postby v1gnesh » Wed Jul 25, 2012 8:18 pm

d,

So the only way is to see if there's a log for that event and if not, modify the parmlib member(after some research)?
boyo
v1gnesh
 
Posts: 72
Joined: Wed Sep 28, 2011 8:24 pm
Has thanked: 1 time
Been thanked: 0 time

Re: FSUM9225 no memory: EDC5132I Not enough memory

Postby dick scherrer » Wed Jul 25, 2012 9:07 pm

Hello,

The only way to see exactly "what"? What would you hope to find in a log?

Unless someone really knows what they are doing or unless you have a "sandbox" lpar for testing these kinds of things, i still suggest changing nothing until the changes are understood. (Potentially) bringing down the entire lpar is not usually acceptable to management and users. . .

Have you talked with SAP support? They may have been asked for help the last time this was done?
Hope this helps,
d.sch.
User avatar
dick scherrer
Global moderator
 
Posts: 6268
Joined: Sat Jun 09, 2007 8:58 am
Has thanked: 3 times
Been thanked: 93 times

Re: FSUM9225 no memory: EDC5132I Not enough memory

Postby Robert Sample » Wed Jul 25, 2012 9:33 pm

So the only way is to see if there's a log for that event and if not, modify the parmlib member(after some research)?
Absolutely and categorically not. As with any vendor product, the FIRST place you should turn to for assistance is not this forum -- it should be the vendor. As long as your site acquired the software legitimately, the vendor will provide you support. The vendor is most likely to have seen this particular error before, know exactly how to correct the problem, and whether or not the correction to the problem requires an IPL of the LPAR or not.

Bottom line: for vendor packages, this is not a vendor support forum. We may be able to assist in some cases, but the vast majority of the time your best bet is to contact the vendor directly.

Topic is being locked to encourage you to contact the vendor.
Robert Sample
Global moderator
 
Posts: 3720
Joined: Sat Dec 19, 2009 8:32 pm
Location: Dubuque, Iowa, USA
Has thanked: 1 time
Been thanked: 279 times

Previous

Return to JCL

 


  • Related topics
    Replies
    Views
    Last post